Subscribe / Unsubscribe

Recent Articles

PCB Prototyping

PCB Prototyping
Brand: NOA Labs
Product Code: 100201
Reward Points: 10
Availability: 9999
Price: $9.90

Available Options

* Quantity:

* Max X-Dimension (cm):

* Max Y-Dimension (cm):

* Layers:

* PCB Thickness (mm):

* Copper Thickness:

* Surface Finish:

* Solder Mask Color:

* E-Test Pass:

* Solder Paste Stencil:

* Separated Sub-Boards:

* Gerber Files(zip or rar):
Upload File

   - OR -   


The easiest and fastest way to get 10 to 500 PCBs prototyped for an incredible low price while the production and quality control follows all industrial standards. Bigger quantities up to 100k, special material or surface, up to 20 layers or even flexible boards (FPC) are available on request.

How it works:

  1. Choose your options above.
  2. Verify that your Gerber files comply with all limits and with the sub-board definition below.
  3. Upload your Gerber files.
  4. Add to Cart.
  5. Done.

For bigger quantities, more layers, special options, tests, panels, discounts or combination with our other services contact us directly at If you want to go from prototying to real production then visit our Other Services.


If you want more than only a naked PCB you can combine the PCB prototyping service together with our other electrical prototyping services to a turnkey solution:


Gerber Files: If you are ordering the first time make sure that your design is comply with  following min/max limits:


Solder Paste Stencil: the solder paste stenil is Laser-cut steel on a aluminum frame with a minimum recommended pitch of 0.4mm.
Please make sure the effective area is twice as big as your PCB so that top and botom side can be placed on the same stencil.

Effective Area Total Size Price Weight
19.0 x 29.0 cm 37.0 x 47.0 cm $20 0.8kg
24.0 x 34.0 cm 42.0 x 52.0 cm $28 1.0kg
37.0 x 47.0 cm 55.0 x 65.0 cm $44 1.7kg
27.0 x 37.0 cm 45.0 x 55.0 cm $36 1.2kg
40.0 x 40.0 cm 58.4 x 58.4 cm $44 1.7kg


Separated Sub-Boards: for seperating boards please use a slot according to following pictures. Drilling holes or other methods for seperating boards will be NOT accepted. Boards which are seperated only by silk-screen are not counted as sub-boards and don't have to be payed extra. Junctions between V-Slots are always crossing (X). For other junctions like (T) or (L) you need to use the normal milling and not the V-Slot.


Panels: For higher quantities (depending on the used area) we will combine your PCBs automatically to a panel. If you don ot want it or want to define your own panel then contact us before ordering at

E-Test: All PCBs are getting a 100% AOI (Automated Optical Inspection) to make sure that all tracks and pads are connected.
In addition to this the PCBs can be tested by a flying probe to make sure that all vias are connected, because this is not visible by the AOI.
1-layer PCBs don't need this tests because there are no vias.
4- and 6-layers will be tested always 100% with a flying probe.
For 2-layer PCBs you have the choice between a 100% E-Test with a flying probe or only to test enough to make sure that at least 95% of all PCBs are working. If you want higher quality choose always E-Test 100% . If you want a lower price then choose E-Test 95%.

Responsibility: We are not taking any responsibility for your Gerber files. We are using them as-they-are for producing the PCBs, so make sure that they comply with all limits and standards.


All Files: no offset, no mirror,no rotate, no upside down.
File name  
Drill & Holes
Solder Paste Top
Solder Paste Bottom
Solder Mask Top
Solder Mask Bottom
Silk Screen Top
Silk Screen Bottom
Top layer
Bottom Layer
4 Layers:
Layer 2
Layer 3
6 layers:
Layer 4
Layer 5









Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Smart-Prototyping © 2013